1. Storz & Bickel Support - English
  2. My Devices
  3. VENTY

How to adjust temperature settings of the VENTY

Updated

 

 

The VENTY offers three factory preset temperature levels:

 
Base Temperature (180°C/356°F as default)
  • Activate: Is automatically active when device is turned on by pressing the Power Button.
  • Indication: 
    • Display shows set temperature.
    • Orange display light during heat up.
    • Green light and double vibration when temperature is reached.
  • Press the + or - button briefly: Changes temperature in 1° steps between 40°C and 210°C (104°F and 410°F)
  • Press and hold the + or - button: Changes temperature by continuously and fast running numbers until button is released.
Booster Temperature (+15°C/27°F)
  • Activate: By double pressing the Power Button. Deactivates after 90s and goes back to your set Base Temperature.
  • Indication: 
    • Display shows Booster Temperature.
    • °C/°F symbol flashes during heat up.
    • Green display light and double vibration when temperature is reached.
  • Press the + or - button briefly:
  • Press and hold the + or - button: Changes temperature by continuously and fast running numbers until button is released.
Superbooster Temperature (+15°C/27°F)
  • Activate: By double pressing the Power Button when starting point is the Booster Temperature. Deactivates after 90s and goes back to your set Base Temperature.
  • Indication:
    • Display shows Superbooster Temperature.
    • °C/°F symbol flashes quickly during heat up.
    • Green display light and double vibration when temperature is reached.
  • Preset the + or - buttons briefly: Changes temperature in 1°steps. Superbooster Temperature offset can be adjusted through the Web App.
  • Press and hold the + or - button: Changes temperature by continuously and fast running numbers until button is released.
  • By double pressing the Power Button in Superbooster Temperature you get back to Base Temperature.

 

Booster Timeout & Permanent Boost:

The Booster and Superbooster Temperatures are automatically deactivated after 90 seconds and the VENTY jumps back to the set base temperature. Activate the Permanent Boost in the S&B Web App to deactivate the 90-second Timeout.

The preset Booster and Superbooster Temperatures as well as the 90-second Booster Timeout can be individually adjusted via STORZ & BICKEL Web App.

Articles in this section

See more
Was this article helpful?
0 out of 0 found this helpful
Have more questions?
Submit a request
Share it, if you like it.